Switch unit
| Switch unit |
The switch unit is located on the outside of the driver's seat. It comprises a number of switches that are supplied with B+ from the control module. When a switch is closed, the B+ supply is returned to the respective switch input on the control module. The voltage then changes from 0V to B+.
When a valid switch setting or memory button is detected, the control module performs the corresponding function, i.e. controls the motors for manual adjustment and memory setting or stores the seat settings when programming.
| Manual adjustment of the seat setting |
When adjusting the seat manually, the control module detects which switch is activated and then supplies power to the corresponding motor.
| Diagnostics |
If the switch function is not correct, the switch position must be read using the diagnostic tool. No diagnostic trouble code is generated.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
