DTC P0453 EVAPORATIVE EMISSION CONTROL SYSTEM PRESSURE SENSOR HIGH INPUT
|
|
DTC P0453 EVAPORATIVE EMISSION CONTROL SYSTEM
PRESSURE SENSOR HIGH INPUT
|
Detect the breaking/shortage of
the fuel tank pressure sensor.
Judge NG when out of the standard value.
(1)
|
Connector
|
(A)
|
Output
voltage
|
(2)
|
Terminal
|
(B)
|
Input voltage
|
|
|
|
(C)
|
To fuel
tank
|
|
|
|
(D)
|
To atmospheric
pressure switching solenoid
|
|
Secondary
Parameters
|
Enable
Conditions
|
Continuous
time when all conditions are completed.
|
≥ 5
seconds
|
Vehicle
speed
|
≥ 2 km/h (1.24 MPH)
|
All
conditions of EVAP canister purge
|
Complete
|
Evaporation
gas density learning value
|
≤ 0.08
|
Main
feedback compensation coefficient
|
≥ 0.9
|
Battery
voltage
|
≥ 10.9
V
|
Perform the diagnosis when purging.
Abnormality Judgment
Judge NG when the continuous time until completing
the malfunction criteria below becomes more than 15 seconds.
Judgment
Value
|
Malfunction
Criteria
|
Threshold
Value
|
Fuel
tank pressure
|
> 7.36 kPa (55.18 mmHg, 2.17 inHg)
|
Fuel
temperature
|
< 35°C (95°F)
|
Atmospheric
pressure
|
≥ 75.1
kPa (563 mmHg, 22.2 inHg)
|
Time Needed for Diagnosis:
15
seconds
Malfunction Indicator
Light Illumination:
Illuminates as soon as malfunction occurs.
Normality Judgment
Judge OK when the malfunction criteria below
is completed.
Judgment
Value
|
Malfunction
Criteria
|
Threshold
Value
|
Fuel tank
pressure
|
> 7.36
kPa (55.18 mmHg, 2.17 inHg)
|
|
•
|
When the OK idling cycle was completed 40 times
in a row
|
|
•
|
When “Clear Memory” was
performed
|
|
MALFUNCTION
INDICATOR LIGHT CLEAR CONDITION
|
|
•
|
When the OK driving cycle was completed 3 times
in a row
|
|
•
|
When “Clear Memory” was
performed
|
Purge control solenoid valve control: Purge
fixation mode is prohibited.
|
ECM OPERATION
AT DTC SETTING
|
Memorize the freeze frame data. (For test
mode $02)
