DTC P2008 INTAKE MANIFOLD RUNNER CONTROL CIRCUIT / OPEN (BANK 1)
|
|
DTC P2008 INTAKE MANIFOLD RUNNER CONTROL
CIRCUIT / OPEN (BANK 1)
|
Detect the open or short circuit of tumble
generated valve motor.
Judge NG when the open signal is sent from
IC after tumble generated valve driving IC diagnosis.
(1)
|
Engine
control module (ECM)
|
(2)
|
Tumble
generated valve
|
(3)
|
Battery
|
|
Secondary
Parameters
|
Enable
Conditions
|
Battery
voltage
|
≥ 10.9
V
|
Always perform the diagnosis continuously.
Judge OK/NG by tumble generator
valve driving IC, and then the result is sent to main IC. At the
main IC, judge NG when the NG signal is sent for 10 times in a row.
Judge OK and clear the NG when the OK signal is sent.
Judgment
Value
|
Malfunction
Criteria
|
Threshold
Value
|
Diagnosis
result signal: Open circuit
|
Low
|
Diagnosis
result signal: Short circuit
|
High
|
Time Needed for Diagnosis:
10
times
Malfunction Indicator
Light Illumination:
Illuminates as soon as malfunction occurs.
|
•
|
When the OK idling cycle was completed 40 times
in a row
|
|
•
|
When “Clear Memory” was
performed
|
|
MALFUNCTION
INDICATOR LIGHT CLEAR CONDITION
|
|
•
|
When the OK driving cycle was completed 3 times
in a row
|
|
•
|
When “Clear Memory” was
performed
|
Tumble generated valve opening
|
•
|
For tumble generated valve all closing points
learning, not allowed to update to closing side.
|
|
•
|
For tumble generated valve all opening
points learning, not allowed to update to opening side.
|
Tumble generated valve control
|
ECM OPERATION
AT DTC SETTING
|
Memorize the freeze frame data. (For test
mode $02)
