DTC P1495 EGR SOLENOID VALVE SIGNAL #2 CIRCUIT MALFUNCTION (HIGH INPUT)
|
|
DTC P1495 EGR SOLENOID VALVE SIGNAL #2
CIRCUIT MALFUNCTION (HIGH INPUT)
|
|
•
|
Detect the open/short circuit of EGR.
|
|
•
|
Judge NG when ECM output level is different
from actual terminal level.
|
(1)
|
Engine
Control Module (ECM)
|
(3)
|
Detecting
circuit
|
(5)
|
Battery voltage
|
(2)
|
CPU
|
(4)
|
Switching
circuit
|
(6)
|
Main relay
|
|
Secondary
Parameters
|
Enable
Conditions
|
Battery
voltage
|
> 10.9
V
|
Always perform the diagnosis continuously.
Abnormality Judgment
Judge NG when the continuous time until completing
the malfunction criteria below becomes more than time needed for
diagnosis.
|
Malfunction
Criteria
|
Threshold
Value
|
Terminal
voltage level when ECM outputs ON signal
|
High level
|
Time Needed for Diagnosis:
2.5
seconds
Malfunction Indicator
Light Illumination:
Illuminates as soon as malfunction occurs.
Normality Judgment
Judge OK and clear the NG when the malfunction
criteria below are not completed.
Judgment
Value
|
Malfunction
Criteria
|
Threshold
Value
|
Terminal
voltage level when ECM outputs OFF signal
|
Low level
|
|
•
|
When the OK idling cycle is completed 40 times
in a row
|
|
•
|
When “Clear Memory” was
performed
|
|
MALFUNCTION
INDICATOR LIGHT CLEAR CONDITION
|
|
•
|
When the OK driving cycle was completed 3 times
in a row
|
|
•
|
When “Clear Memory” was
performed
|
|
•
|
Front oxygen (A/F) sensor main learning
compensation: Not allowed to calculate
|
|
•
|
Knock sensor learning compensation:
Not allowed to calculate
|
|
•
|
EGR control: Not allowed to operate
|
|
ECM OPERATION
AT DTC SETTING
|
Memorize the freeze frame data. (For test
mode $02)
