SAAB WIS ONLINE

ATF, REPLACEMENT

ATF, REPLACEMENT

AUTOMATIC TRANSMISSION FLUID

Drain the ATF (Automatic Transmission Fluid) by removing drain plug.

Note

Before starting work, cool off the ATF well.



(A)

Front differential drain plug

(B)

ATF drain plug



Replace the gasket with a new one, and then tighten the specified torque.

Tightening torque:

25 Nm (2.55 kgf-m, 18.4 ft-lb)

Fill ATF up to the middle of the “COLD” side on level gauge by using the gauge hole.

Recommended fluid:

Dexron III type automatic transmission fluid

Fluid capacity:

Fill the same amount drained from ATF drain plug hole.

Check the ATF level.


(A)

Level gauge

(B)

Hot side

(C)

Upper level

(D)

Lower level

(E)

Cold side



ATF FILTER

Note

ATF filter is a maintenance free part. ATF filter needs replacement, when it has physically damaged or ATF leaked.


For the replacement procedures of the ATF filter: