INSPECTION
| INSPECTION |
Remove the coolant filler tank cap, top off coolant filler tank, and then attach the tester to coolant filler tank in place of cap.
Engine coolant leaks at/around radiator.
Engine coolant leaks at/around hoses or connections.
| Important | ||
| • |
Inspection must be carried out
at the side of coolant filler tank, not at the side of radiator.
|
|
| • |
Engine should be turned off.
|
|
| • |
Wipe engine coolant from check points in advance.
|
|
| • |
Be careful to prevent engine coolant from spurting out
when removing the tester.
|
|
| • |
Be careful also not to deform the filler neck of coolant
filler tank when installing or removing tester.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
