REMOVAL

REMOVAL

Disconnect the ground cable from battery.

Disconnect the front oxygen (A/F) sensor connector.

Disconnect the rear oxygen sensor connector.

Lift-up the vehicle.

Separate the front and center exhaust pipe assembly and rear exhaust pipe.

Important
Be careful, the exhaust pipe is hot.

Remove the under cover.

Remove the nuts which hold the front exhaust pipe onto cylinder heads.

Important
Be careful not to pull down the front and center exhaust pipe assembly.

Remove the bolt which installs the front and center exhaust pipe assembly to hanger bracket.

Remove the front and center exhaust pipe assembly from vehicle.

Important
•	Be careful not to let the front and center exhaust pipe assembly fall off when removing as it is quite heavy.
•	After removing the front and center exhaust pipe assembly, do not apply excessive pulling force on the rear exhaust pipe.

Separate the front exhaust pipe from center exhaust pipe.

Remove the front oxygen (A/F) sensor and the rear oxygen sensor.