SAAB WIS ONLINE

INSTALLATION

INSTALLATION

Before installing exhaust temperature sensor, apply anti-seize compound only to the threaded portion of rear oxygen sensor to make the next removal easier.

Important

Never apply anti-seize compound to protector of exhaust temperature sensor.


Anti-seize compound:

SS-30 by JET LUBE

Install the exhaust temperature sensor.

Note

Align the harness (A) of exhaust temperature sensor to the marking (B) of joint pipe, and tighten the screws.


Tightening torque:

21 Nm (2.1 kgf-m, 15.2 ft-lb)


Install the joint pipe.

Connect the battery ground cable to battery.