SAAB WIS ONLINE

INSTALLATION

INSTALLATION

Before installing front oxygen (A/F) sensor, apply anti-seize compound only to the threaded portion of front oxygen (A/F) sensor to make the next removal easier.

Anti-seize compound:

SS-30 by JET LUBE

Important

Never apply anti-seize compound to protector of front oxygen (A/F) sensor.


Install the front oxygen (A/F) sensor.

Tightening torque:

30 Nm (3.1 kgf-m, 22.1 ft-lb)


Install the service hole cover.


Lower the vehicle.

Install the front right side wheel.

Connect the engine harness to the bracket (B) using clips (A).


Connect the connector of front oxygen (A/F) sensor.


Connect the battery ground cable to battery.