SAAB WIS ONLINE

REMOVAL

REMOVAL

Disconnect the ground cable from battery.


Disconnect the connector from the front oxygen (A/F) sensor.


Disconnect the engine harness fixed by clip (A) from the bracket (B).


Remove the front right side wheel.

Lift-up the vehicle.

Remove the service hole cover.


Apply spray type lubricant to the threaded portion of front oxygen (A/F) sensor, and leave it for one minute or more.

Remove the front oxygen (A/F) sensor.

Important

When removing the front oxygen (A/F) sensor, wait until exhaust pipe cools, otherwise it will damage exhaust pipe.