INSTALLATION
| INSTALLATION |
Install in the reverse order of removal.
| Note | ||
|
Use a new gasket. |
||
| 1. |
Ensure
the sealing portion is free from fuel or foreign particles before
installation.
|
|
| 2. |
Tighten the nuts and bolts to specified torque in the
order as shown in the figure.
Tightening torque: 4.4 Nm (0.45 kgf-m, 3.3 ft-lb) 
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
