SAAB WIS ONLINE

PROCEDURE

PROCEDURE

RELEASING OF FUEL PRESSURE

Warning
• Place “NO FIRE” signs near the working area.

• Be careful not to spill the fuel.


Disconnect the connector from the fuel pump relay.


Start and run the engine until it stalls.

After the engine stalls, crank it for five more seconds.

Turn the ignition switch to OFF.

DRAINING FUEL

Warning
• Place “NO FIRE” signs near the working area.

• Be careful not to spill the fuel.


Set the vehicle on the lift.

Disconnect the ground cable from battery.


Open the fuel filler flap lid and remove the fuel filler cap.

Lift-up the vehicle.

Drain the fuel from the fuel tank.

Set a container under the vehicle and remove drain plug from the fuel tank.


Tighten the fuel drain plug.

Tightening torque:

26 Nm (2.65 kgf-m, 19.2 ft-lb)