SAAB WIS ONLINE

INSTALLATION

INSTALLATION

Install in the reverse order of removal.

Do the following:

Apply fluid packing to the matching surfaces of oil pump.

Fluid packing:

THREE BOND 1215 (Part No. 32005013) or equivalent


Replace the O-ring (A) with a new one.

Apply a coat of engine oil to the inside of oil seal.


Be careful not to scratch the oil seal when installing the oil pump on cylinder block.

Position the oil pump, aligning the notched area with crankshaft, and push the oil pump straight.

Important

Make sure the oil seal lip is not folded.


Install the oil pump.

Tightening torque:

6.4 Nm (0.65 kgf-m, 4.7 ft-lb)