REMOVAL

REMOVAL

Disconnect the ground cable from battery.

Lift-up the vehicle.

Remove the under cover.

Remove the bolts which install the water pipe of oil cooler to oil pump.

Remove the water pipe and hoses between oil cooler and water pump.

Remove the radiator.

Remove the crankshaft position sensor.

Remove the V-belts.

Remove the rear side V-belt tensioner.

Remove the crank pulley by using ST.

Remove the water pump.

Remove the timing belt guide. (MT model)

Remove the crank sprocket.

Remove the bolts which install the oil pump onto cylinder block.

Remove the oil pump using the flat tip screwdriver.

Important
Be careful not to scratch the mating surfaces of cylinder block and oil pump.