SAAB WIS ONLINE

INSTALLATION

INSTALLATION

Install in the reverse order of removal.

Do the following:

Apply fluid packing to the matching surfaces of oil pump.

Fluid packing:

THREE BOND 1215 (Part No. 32005013) or equivalent

Replace the O-ring (A) with a new one.


Apply a coat of engine oil to the inside of oil seal.


Be careful not to scratch the oil seal when installing oil pump on cylinder block.

Position the oil pump, aligning the notched area with crankshaft, and push the oil pump straight.

Important

Make sure the oil seal lip is not folded.


Install the oil pump.

Apply liquid gasket to the threaded portion of three bolts in LH side.

Fluid packing:

THREE BOND 1215 (Part No. 32005013) or equivalent

Tightening torque:

6.4 Nm (0.65 kgf-m, 4.7 ft-lb)