SAAB WIS ONLINE

ASSEMBLY

ASSEMBLY


(1)

Connecting rod bearing

(5)

Second ring

Tightening torque: Nm (kgf-m, ft-lb)

(2)

Connecting rod

(6)

Top ring

T:

45 (4.6, 33.3)

(3)

Connecting rod cap

(7)

Snap ring

(4)

Oil ring

(8)

Side mark



Apply oil to the surfaces of the connecting rod bearings.

Install the connecting rod bearings on connecting rods and connecting rod caps.

Position each connecting rod with the marked side facing forward, and install it.

Install the connecting rod cap with connecting rod nut.

Ensure the arrow on connecting rod cap faces toward front during installation.

Important
• Each connecting rod has its own mating cap. Make sure that they are assembled correctly by checking their matching number.

• When tightening the connecting rod nuts, apply oil on the threads.


Install the expander, lower rail and upper rail in this order by hand. Install the second ring and top ring with a piston ring expander.