SAAB WIS ONLINE

REMOVAL

REMOVAL

TIMING BELT

Remove the V-belts.

Remove the crank pulley.

Remove the timing belt cover.

Remove the timing belt guide. (MT model)


If the alignment mark or arrow mark (which indicates rotation direction) on timing belt fade away, put new marks before removing the timing belt as shown in procedures below.

To turn crankshaft, use the ST: Align the mark (a) of sprocket to the cylinder block notch (b), and then ensure the right side cam sprocket mark (c), cam cap and cylinder head matching surface (d) or left side cam sprocket mark (e), timing belt cover notch (f) are properly adjusted.

ST 32005170 CRANKSHAFT SOCKET



Using white paint, put alignment marks or arrow marks on the timing belts in relation to the crank sprocket and cam sprockets.


Specified data:

Z 1 : Length of 46.8 teeth

Z 2 : Length of 43.7 teeth


Remove the belt idler (No. 2).

Remove the belt idler No. 2.


Remove the timing belt.


BELT IDLER AND AUTOMATIC BELT TENSION ADJUSTER ASSEMBLY

Remove the belt idler (No. 1).


Remove the automatic belt tension adjuster assembly.