INSTALLATION
| INSTALLATION |
Install in the reverse order of removal.
| Note | ||
| • |
If the cable clamp is damaged, replace it with a new
one.
|
|
| • |
Never fail to cover the outer cable end with boot.
|
|
| • |
Be careful not to kink the accelerator cable.
|
|
| • |
Do not apply grease to except specified part.
|
|
Apply grease to engine side accelerator cable end.
Grease:
Silicolube G-30M (Part No. 32005017)
|
(A)
|
Accelerator
cable end
|
|
(B)
|
Throttle
cam
|
Adjustment after pedal installation.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
