INSTALLATION
| INSTALLATION |
Install in the reverse order of removal.
| Note | ||
| • |
If the cable clamp is damaged, replace it with a new
one.
|
|
| • |
Never fail to cover the outer cable end with boot.
|
|
| • |
Be careful not to kink the accelerator cable.
|
|
| • |
For tightening torque, refer to “COMPONENT”.
|
|
After the installation, adjust the pedal.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
