REMOVAL
| REMOVAL |
Disconnect the ground cable from battery.
Remove the lock nut from accelerator cable bracket.
Separate the accelerator cable from bracket.
Remove the accelerator cable end from throttle cam.
| Note | ||
|
Be careful not to kink the accelerator cable. |
|
(A)
|
Lock nut
|
|
(B)
|
Accelerator
cable bracket
|
|
(C)
|
Accelerator
cable
|
|
(D)
|
Throttle
cam
|
Remove the clip inside engine compartment.
|
(A)
|
Toe board
|
|
(B)
|
Accelerator
cable
|
|
(C)
|
To accelerator
pedal
|
|
(D)
|
Brake booster
|
|
(E)
|
Clip
|
Remove the instrument panel lower cover from instrument panel.
Remove the accelerator pedal connecting bolt from accelerator pedal bracket.
Disconnect the grommet from toe board.
| Note | ||
|
From inside compartment, push the grommet (A) into hole. |
Pull out the cable from toe board hole.
Disconnect the accelerator cable bushing from accelerator pedal lever.
|
(A)
|
Flat tip
screwdriver
|
Disconnect the accelerator cable stopper (A) from bracket.
Separate the accelerator cable and bracket.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
