INSPECTION
| INSPECTION |
Check each part (bushing, cushion rubber, spacer, boot, stay and rod, etc.) for deformation, damage and wear. Repair or replace any defective part. Determine defective parts by comparing with new parts.
|
(A)
|
Bushing
|
|
(B)
|
Cushion
rubber
|
|
(C)
|
Spacer
|
|
(D)
|
Boot
|
|
(E)
|
Stay
|
|
(F)
|
Rod
|
Check the swing torque of the rod in relation of the gear shift lever.
If the torque exceeds the specification, replace the bushing or retighten the nuts.
Swing torque:
3.7 N (0.38 kgf, 0.84 lb) or less
|
(A)
|
Center
of rotation
|
|
(B)
|
Swing torque
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
