INSPECTION

/ 9-2X (9346) / 2005 / 3. Electrical System / CONTROL SYSTEMS / Select Cable / Adjustment/Replacement / INSPECTION

Check the removed cable and replace if damaged, rusty, or malfunctioning.

Check for smooth operation of the cable.

Check the inner cable for damage and rust.

Check the outer cable for damage, bends, and cracks.

Check the boot for damage, cracks, and deterioration.

Move the select lever from “P” range to “1” range. You should be able to feel the detents in each range. If the detents cannot be felt or the range pointer is improperly aligned, adjust the cable.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.