ASSEMBLY

/ 9-2X (9346) / 2005 / 3. Electrical System / CONTROL SYSTEMS / Select Lever / Adjustment/Replacement / ASSEMBLY

Clean all parts before assembly.

Apply grease [SUNLIGHT 2 (Part No. 32005009) or equivalent] to each parts.

Assembly is in the reverse order of disassembly.

After completion of fitting, transfer the select lever to range “P” — “1”, then check whether the indicator and select lever agree, whether the pointer and position mark agree and what the operating force is.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.