SAAB WIS ONLINE

CHECK CRUISE SET INDICATOR LIGHT

CHECK CRUISE SET INDICATOR LIGHT

TROUBLE SYMPTOM:

Cruise control can be set, but cruise set indicator light does not illuminate.

WIRING DIAGRAM:


CHECK CRUISE SET INDICATOR LIGHT CIRCUIT.

Turn the ignition switch to OFF.

Disconnect the combination meter harness connector.

Turn the ignition switch to ON.

Measure the voltage between harness connector terminal and chassis ground.

Connector & terminal

(i11) No. 7 (+) — Chassis ground (−):

Is the voltage more than 10 V?

Yes


No

• Check the fuse No. 13 (in fuse & relay box).

• Check the harness for open or short between combination meter and fuse & relay box.


CHECK CRUISE SET INDICATOR LIGHT CIRCUIT.

Turn the ignition switch to OFF.

Disconnect the cruise control module harness connector.

Measure the resistance between cruise control module harness connector terminal and combination meter harness connector terminal.

Connector & terminal

(i10) No. 21 — (B94) No. 3:

Is the resistance less than 10 Ω?

Yes


No

Repair the harness.


CHECK CRUISE SET INDICATOR LIGHT CIRCUIT.

Ground the cruise control module harness connector terminal with a suitable wire.

Turn the ignition switch to ON.

Connector & terminal

(B94) No. 3 — Chassis ground:

Does the cruise set indicator light illuminate?

Yes

Replace the cruise control module.


No

Check the cruise set indicator light bulb in combination meter, and replace it if malfunction occurred. No malfunction found, replace the printed circuit of combination meter.