INSTALLATION
| INSTALLATION |
| RH SIDE |
Install in the reverse order of removal.
Tightening torque (Spark plug):
21 Nm (2.1 kgf-m, 15.2 ft-lb)
Tightening torque (Ignition coil):
16 Nm (1.6 kgf-m, 11.7 ft-lb)
| Note | ||
|
The above torque should be only applied to new spark plugs without oil on their threads. |
||
|
In case their threads are lubricated, the torque should be reduced by approx. 1/3 of the specified torque in order to avoid over-stressing. |
| LH SIDE |
Install in the reverse order of removal.
Tightening torque (Spark plug):
21 Nm (2.1 kgf-m, 15.2 ft-lb)
Tightening torque (Ignition coil):
16 Nm (1.6 kgf-m, 11.7 ft-lb)
| Note | ||
|
The above torque should be only applied to new spark plugs without oil on their threads. |
||
|
In case their threads are lubricated, the torque should be reduced by approx. 1/3 of the specified torque in order to avoid over-stressing. |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
