SAAB WIS ONLINE

ADJUSTMENT

ADJUSTMENT

HEADLIGHT AIMING

Important

Turn off the light before adjusting headlight aiming. If the light is necessary to check aiming, do not turn on for more than 2 minutes.


Before checking the headlight aiming, be sure of the following:


• The area around the headlight has not sustained any accident, damage or other type of deformation.

• Vehicle is parked on level ground.

• The inflation pressure of tires is correct.

• Vehicle’s gas tank is fully charged.

• Bounce the vehicle several times to normalize the suspension.

• Make certain that someone is seated in the driver’s seat.


Turn the headlights on and then adjust the low beam pattern to the following positions on the screen.

Position the headlight beam leveler switch to “0”.

Using a philips head screwdriver (A), rotate the adjusting screw (B) to adjust aim.



(A)

Bulb center marking

(B)

3 m (10 ft)



H mm (in)

678 (26.69)

h mm (in) at 3 m (10 ft)

0