SAAB WIS ONLINE

CAUTION

CAUTION


• Supplemental Restraint System “Airbag”

The airbag system wiring harness is routed near the transmission control module (TCM).

Important
• All airbag system wiring harness and connectors are colored yellow. Do not use an electrical test equipment on these circuit.

• Be careful not to damage the airbag system wiring harness when performing diagnostics and servicing the TCM.


• Measurement

When measuring the voltage and resistance of ECM, TCM or each sensor, use a tapered pin with diameter of less than 0.64 mm (0.025 in) in order to avoid poor contact. Do not insert the pin more than 0.65 mm (0.256 in).