INSPECTION
| INSPECTION |
| BATTERY |
Measure the battery voltage and specific gravity of electrolyte.
Standard voltage: 12 V or more
Specific gravity: Above 1.260
| TRANSMISSION GROUND |
Make sure that the ground terminal bolt is tightened securely.
| • |
Chassis side
Tightening torque: 13 Nm (1.3 kgf-m, 9.4 ft-lb) 
|
|
| ATF LEVEL |
Make sure that ATF level is within the specification.
|
(A)
|
Level gauge
|
|
(B)
|
“HOT” side
|
|
(C)
|
Upper level
|
|
(D)
|
Lower level
|
|
(E)
|
“COLD” side
|
| FRONT DIFFERENTIAL OIL LEVEL |
Make sure that front differential oil level is within the specification.
|
(A)
|
Upper level
|
|
(B)
|
Lower level
|
| OPERATION OF SELECT LEVER |
Make sure there is no abnormal noise, dragging or contact pattern in each select lever range.
|
|||||||
Warning
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
