INSPECTION
| INSPECTION |
| HIGH CLUTCH AND REVERSE CLUTCH |
Inspect the following items.
| • |
Drive
plate facing for wear and damage
|
|
| • |
Discoloration of driven plate (Burnt color)
|
|
| • |
Snap ring for wear, return spring for setting and breakage,
and snap ring retainer for deformation
|
|
| • |
Lip seal and D-ring for damage
|
|
| • |
Piston and drum check ball for operation
|
|
| • |
Adjust total end play.
|
|
| PLANETARY GEAR AND LOW CLUTCH |
Inspect the following items.
| • |
Drive
plate facing for wear and damage
|
|
| • |
Discoloration of driven plate (Burnt color)
|
|
| • |
Snap ring for wear, return spring for breakage or setting,
and spring retainer for deformation
|
|
| • |
Lip seal and D-ring for damage
|
|
| • |
Piston check ball for operation
|
|
| • |
Measure the total end play and adjust to within specifications.
|
|
| 2-4 BRAKE |
Inspect the following items.
| • |
Drive
plate facing for wear and damage
|
|
| • |
Discoloration of driven plate (Burnt color)
|
|
| • |
Snap ring for wear and spring retainer for deformation
|
|
| • |
Lip seal and D-ring for damage
|
|
| • |
Measure the total end play and adjust to within specifications.
|
|
| ONE-WAY CLUTCH |
| • |
Make sure
the snap ring is not worn and the seal rings are not damaged.
|
|
| • |
Measure the total end play and adjust to within specifications.
|
|
| LOW & REVERSE BRAKE |
Check for the following.
| • |
Drive
plate facing for wear or damage
|
|
| • |
Discoloration of driven plate (Burnt color)
|
|
| • |
Snap ring for wear and spring retainer for deformation
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
