SAAB WIS ONLINE

INSTALLATION

INSTALLATION

Install the oil cooler outlet and inlet pipes using a new aluminum washer.

Tightening torque:

T1: 44 Nm (4.5 kgf-m, 32.5 ft-lb)

T2: 25 Nm (2.5 kgf-m, 18.1 ft-lb)


Install ATF cooler pipe to frame.


Connect ATF cooler hose to pipe transmission side.

Note
• Install so that the hose is not folded over, excessively bent, or twisted.

• Be careful to insert the hose to the specified position.



Connect ATF cooler hose to pipe of radiator side.

Note
• Install so that the hose is not folded over, excessively bent, or twisted.

• Be careful to insert the hose to the specified position.



Install the under cover.

Install battery and washer tank.

Fill ATF.

Note

Make sure there are no ATF leaks in joints between the transmission, radiator, pipes, and hoses.