DISASSEMBLY
| DISASSEMBLY |
Straighten the staked portion of the lock nut, and remove the lock nut while locking the rear spline portion of the shaft with ST1 and ST2. Then pull off the drive pinion collar.
ST1 32005120 HOLDER
ST2 32005154 WRENCH
ST3 32005153 ADAPTER
Using a press, separate the rear roller bearing and outer race from the shaft.
|
(A)
|
Outer race
|
Using a press and ST, separate the front roller bearing from the shaft.
ST 32005108 REPLACER
|
(A)
|
Front roller
bearing
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
