DISASSEMBLY

DISASSEMBLY

MPT MODEL

Take out the transfer clutch by lightly tapping the end of the rear drive shaft.

Note
Be careful not to damage the oil seal in the extension.

(A)	Transfer clutch
(B)	Extension case

Remove the transmission clutch pipe without deforming pipe.

(A)	Extension case
(B)	Transfer clutch pipe

VTD MODEL

Remove snap ring using ST1, ST2, ST3 and a press.

ST1 32005075 COMPRESSOR

ST2 32005112 SEAT

ST3 32005074 PLIERS

Remove test plug.

(A)	Test plug
(B)	Extension case

Remove clutch piston using compressed air.

Pay attention, not to deform pipe, and remove transfer clutch pipe.

Remove the dust cover from the extension case.

Remove the oil seal from the extension case.