SAAB WIS ONLINE

INSTALLATION

INSTALLATION

Connect the inhibitor switch harness connector to inhibitor switch.

Install the inhibitor switch to transmission case.


(A)

Inhibitor switch



Move the range select lever to neutral position.

Using the ST, tighten the bolts of inhibitor switch.

ST 32005129 STOPPER PIN

Tightening torque:

3.5 Nm (0.36 kgf-m, 2.6 ft-lb)


(A)

Inhibitor switch

(B)

Range select lever



Install the select cable to range select lever.

Install the plate assembly to transmission.

Tightening torque:

T: 25 Nm (2.5 kgf-m, 18.1 ft-lb)


(A)

Select cable

(B)

Plate ASSY



Install the washer and snap pin to range select lever.


(A)

Range select lever

(B)

Snap ring

(C)

Select cable

(D)

Washer



Install the front and center exhaust pipes. (Saab 9-2X 2.5i Linear)



Install the center exhaust pipe. (Saab 9-2X 2.0T Aero)



Lower the vehicle.

Install the inhibitor switch connector from stay.

Connect the inhibitor switch connector.


(A)

Inhibitor switch



Install the air intake chamber. (Saab 9-2X 2.5i Linear)

Install the intercooler. (Saab 9-2X 2.0T Aero)



Inspect the inhibitor switch.