REMOVAL
| REMOVAL |
| MPT MODEL |
Remove the transmission assembly from the vehicle.
Remove rear vehicle speed sensor, and separate the transmission case and extension case.
Set the range select lever to “P”.
Straighten the staked portion, and remove the lock nut.
|
(A)
|
Reduction
driven gear
|
|
(B)
|
Reduction
drive gear
|
Using the ST1 and ST2, extract the reduction driven gear.
ST1 32005144 PULLER
ST2 32005174 PULLER SET
|
(A)
|
Reduction
driven gear
|
|
(B)
|
Reduction
drive gear
|
| VTD MODEL |
Remove the transmission assembly from the vehicle.
Remove rear vehicle speed sensor, and separate the transmission case and extension case.
Remove the rear drive shaft.
Set the range select lever to “P”.
Straighten the staked portion, and remove the lock nut.
Using the ST1 and ST2, extract the reduction driven gear.
ST1 32005144 PULLER
ST2 32005174 PULLER SET
Pull out the center differential assembly.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
