ASSEMBLY

ASSEMBLY

Install the transfer clutch piston.

(A)	Transfer clutch piston
(B)	Rear drive shaft

Install return spring to transfer piston.

(A)	Return spring
(B)	Rear drive shaft

Apply ATF to the transfer clutch piston seal lip and install it.

(A)	Transfer clutch piston seal
(B)	Rear drive shaft

Install ST to rear drive shaft.

ST 32005128 SNAP RING OUTER GUIDE

(A)	Transfer clutch

Install snap ring to ST.

ST 32005128 SNAP RING OUTER GUIDE

(A)	Snap ring
(B)	Transfer clutch

Using ST1 and ST2, install snap ring to rear drive shaft.

ST1 32005128 SNAP RING OUTER GUIDE

ST2 32005127 INSTALLER

(A)	Snap ring
(B)	Transfer clutch

Install the driven plates, drive plates, pressure plate and snap ring.

(A)

Snap ring

Apply compressed air to see if the assembled parts move smoothly.

Check clearance between snap ring and pressure plate.

Press-fit a new ball bearing with ST.

ST 32005175 INSTALLER

(A)	Ball bearing

Coat a new seal ring with vaseline, and install it in the seal ring groove of the shaft.

Note
Do not expand the seal ring excessively when installing.

(A)	Snap ring
(B)	Transfer clutch

Install the transfer clutch assembly without damaging seal ring.

(A)	Transfer clutch
(B)	Extension case