SAAB WIS ONLINE

REMOVAL

REMOVAL

Set the vehicle on a lift.

Disconnect the ground cable from battery.

Remove intercooler.

Remove the pitching stopper.


Remove center exhaust pipe.



Remove the rear exhaust pipe and muffler.



Raise the vehicle and drain the ATF.


(A)

Oil pan

(B)

Drain plug (ATF)

(C)

Differential gear oil drain plug



Remove the heat shield cover. (If equipped)

Remove the propeller shaft.

Remove the transmission rear crossmember.

Support the transmission using a transmission jack and raise slightly.

Remove the bolts and nuts as shown in the figure.


Remove the rear vehicle speed sensor.


Remove the select cable nut.


Move the gear select cable so that extension bolts can be removed.

Remove the bolts.

Remove the extension case.

Note

Use a container to catch oil flowing from extension.



Disconnect the transfer duty solenoid connector.

Remove the transfer duty solenoid and transfer valve body.


(A)

Transfer valve body

(B)

Transfer duty solenoid connector

(C)

Transfer duty solenoid