SAAB WIS ONLINE

INSTALLATION

INSTALLATION

PITCHING STOPPER

Install the pitching stopper.

Tightening torque:

T1: 50 Nm (5.1 kgf-m, 37 ft-lb)

T2: 58 Nm (5.9 kgf-m, 43 ft-lb)


Install the air intake chamber. (Saab 9-2X 2.5i Linear)



Remove intercooler. (Saab 9-2X 2.0T Aero)



TRANSMISSION REAR CROSSMEMBER AND REAR CUSHION RUBBER

Install the rear cushion rubber.

Tightening torque:

39 Nm (4.0 kgf-m, 29 ft-lb)

Install the crossmember.

Tightening torque:

T1: 35 Nm (3.6 kgf-m, 26 ft-lb)

T2: 70 Nm (7.1 kgf-m, 51 ft-lb)


Remove the transmission jack.

Install the heat shield cover. (If equipped)

Install the front, center, rear exhaust pipes and the muffler. (Saab 9-2X 2.5i Linear)



Install center and rear exhaust pipes, and muffler. (Saab 9-2X 2.0T Aero)