INSTALLATION

INSTALLATION

Install in the reverse order of removal.

Note
•	Before installing the operating cylinder, apply grease (SUNLIGHT 2: Part No. 32005009) to contact point of the release lever and operating cylinder.
•	For Saab 9-2X 2.0T Aero, bleed air with the clutch hose installed to the operating cylinder before installing the operating cylinder to vehicle.

•

Saab 9-2X 2.5i Linear

Tightening torque:

T1: 18 Nm (1.8 kgf-m, 13.3 ft-lb)

T2: 37 Nm (3.8 kgf-m, 27.5 ft-lb)

•

Saab 9-2X 2.0T Aero

Tightening torque:

T1: 18 Nm (1.8 kgf-m, 13.3 ft-lb)

T2: 37 Nm (3.8 kgf-m, 27.5 ft-lb)

Note

•

Be sure to install the clutch hose with the mark side facing upward.

•

Be careful not to twist the clutch hose during installation.

After bleeding air from the operating cylinder, ensure that clutch operates properly.