SAAB WIS ONLINE

REMOVAL

REMOVAL

Jack-up the vehicle, support it with rigid racks, and then remove the front wheel cap and wheels.

Raise the caulking portion of axle nut.

Depress the brake pedal and remove the axle nut using a socket wrench.

Important

Be sure to loosen the axle nut after removing the wheel from vehicle. Failure to follow this rule may damage the wheel bearings.


Remove the stabilizer link from transverse link.

Disconnect the transverse link from housing.

Remove the front drive shaft assembly. If it is hard to remove, use the ST1 and ST2.

ST1 32005197 AXLE SHAFT PULLER

ST2 32005203 AXLE SHAFT PULLER PLATE

Important
• Be careful not to damage the oil seal lip and tone wheel when removing the front drive shaft.

• When the front drive shaft is to be replaced, also replace the inner oil seal.



Remove the front drive shaft from transmission using bar.

Important

Be careful not to damage the holder portion.