CAUTION

CAUTION

•

Wear working clothing, including a cap, protective goggles, and protective shoes during operation.

•

Remove contamination including dirt and corrosion before removal, installation or disassembly.

•

Keep the disassembled parts in order and protect them from dust or dirt.

•

Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, installation, disassembly, and replacement.

•

Be careful not to burn yourself, because each part on the vehicle is hot after running.

•

Use genuine grease etc. or the equivalent. Do not mix grease etc. with that of another grade or from other manufacturers.

•

Be sure to tighten fasteners including bolts and nuts to the specified torque.

•

Place shop jacks or rigid racks at the specified points.

•

Apply grease onto sliding or revolution surfaces before installation.

•

Before installing snap rings, apply sufficient amount of grease to avoid damage and deformation.

•

Before securing a part on a vise, place cushioning material such as wood blocks, aluminum plate, or shop cloth between the part and the vise.