ADJUSTMENT
ADJUSTMENT |
Selection of main shaft rear plate:
Using the ST, measure the amount (A) of ball bearing protrusion from transmission main case surface and select the proper plate in the following table.
Note | ||
Before measuring, tap the end of main shaft with a plastic hammer lightly in order to make the clearance zero between the main case surface and the moving flange of bearing. |
ST 32005092 DEPTH GAUGE
Dimension (A) mm (in) | Part No. | Mark |
4.00 — 4.13
(0.1575 — 0.1626) |
32006725
|
1
|
3.87 — 3.99
(0.1524 — 0.1571) |
32006726
|
2
|