SAAB WIS ONLINE

ASSEMBLY

ASSEMBLY

Install the return spring (1st-2nd), return spring cap, reverse accent shaft, check cam, return spring and check spring onto reverse check sleeve.

Note

Be sure the bent section of reverse check spring is positioned in the groove in check cam.



(A)

Reverse check plate

(B)

Reverse check spring

(C)

Return spring (5th-Rev)

(D)

Reverse check cam

(E)

Reverse accent shaft

(F)

Return spring cap

(G)

Return spring (1st-2nd)



Hook the bent section of reverse check spring over reverse check plate.

Rotate the cam so that the protrusion of reverse check cam is at the opening in plate.

With the cam held in that position, install the plate onto reverse check sleeve and hold with snap ring.

Position the O-ring in groove in sleeve.