SAAB WIS ONLINE

DISASSEMBLY

DISASSEMBLY

Cover the reverse check sleeve with a rag, and remove the snap ring using a screwdriver.

Note

Replace the snap ring with a new one if deformed or weakened.



(A)

Snap ring



Remove the reverse check plate, reverse check spring, reverse check cam, return spring (5th-Rev), reverse accent shaft, return spring cap and return spring (1st-2nd).


(A)

Reverse check plate

(B)

Reverse check spring

(C)

Return spring (5th-Rev)

(D)

Reverse check cam

(E)

Reverse accent shaft

(F)

Return spring cap

(G)

Return spring (1st-2nd)



Remove the O-ring.

Note
• Reverse check sleeve assembly uses an O-ring which should not be scratched.

• Be careful not to break the adjusting shim placed between reverse check sleeve assembly and case.