INSPECTION

/ 9-2X (9346) / 2005 / 4. Transmission / MANUAL TRANSMISSION AND DIFFERENTIAL / Switches and Harness / Adjustment/Replacement / INSPECTION

BACK-UP LIGHT SWITCH

Inspect the back-up light switch.

NEUTRAL POSITION SWITCH

Turn the ignition switch to OFF.

Disconnect the connector of neutral position switch.

Measure the resistance between neutral position switch terminals.

Saab 9-2X 2.5i Linear:

Gear shift position	Terminal No.	Specified resistance
Neutral position	1 and 2	Less than 1 Ω
Other positions		More than 1 MΩ

Saab 9-2X 2.0T Aero:

Gear shift position	Terminal No.	Specified resistance
Neutral position	1 and 3	Less than 1 Ω
Other positions		More than 1 MΩ

•	Saab 9-2X 2.5i Linear

•	Saab 9-2X 2.0T Aero

Replace defective parts.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.