INSTALLATION

INSTALLATION

BACK-UP LIGHT SWITCH AND NEUTRAL POSITION SWITCH

Install the back-up light switch and neutral position switch with harness.

Tightening torque:

32.3 Nm (3.3 kgf-m, 23.8 ft-lb)

(A)	Neutral switch
(B)	Back-up light switch

Connect the connector of back-up light switch and neutral position switch.

Install the air intake duct and cleaner case. (Saab 9-2X 2.5i Linear)

Install the intercooler. (Saab 9-2X 2.0T Aero)

Connect the battery ground cable to battery.