REMOVAL

REMOVAL

Remove the manual transmission assembly from vehicle.

Remove the clutch release lever.

Remove the transfer case with extension case assembly.

Remove the bearing mounting bolts.

Remove the main shaft rear plate.

(A)	Main shaft rear plate

Separate the transmission case into right and left cases by loosening the coupling bolts and nuts.

Remove the drive pinion shaft assembly from left side transmission case.

Note
Use a hammer handle, etc. to remove if too tight.

(A)	Main shaft assembly
(B)	Drive pinion shaft assembly

Remove the main shaft assembly.

Remove the differential assembly.

Note
•	Be careful not to confuse the right and left roller bearing outer races.
•	Be careful not to damage the retainer oil seal.