INSPECTION
| INSPECTION |
Park the vehicle on a level surface.
Turn the ignition switch to OFF, and then wait until the engine cools.
Remove the oil level gauge and wipe it clean.
Reinsert the level gauge all the way. Be sure the level gauge is correctly inserted and in the proper direction.
Pull out the oil level gauge again and check the oil level on it. If it is below the lower level, add oil through the oil level gauge hole to bring the level up to the upper level.
|
(A)
|
Oil level
gauge
|
|
(B)
|
Upper level
|
|
(C)
|
Lower level
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
