REPLACEMENT
| REPLACEMENT |
Pull out the oil level gauge.
Lift-up the vehicle.
Drain the transmission gear oil completely.
| Important | ||
|
Directly after the engine has been running, the transmission gear oil is hot. Be careful not to burn yourself. |
||
| Note | ||
|
Tighten the transmission gear oil drain plug after draining the transmission gear oil. |
Tightening torque:
69 Nm (7.0 kgf-m, 50.6 ft-lb)
|
(A)
|
Drain plug
|
|
(B)
|
Gasket
|
Lower the vehicle.
Pour gear oil into the gauge hole.
Recommended gear oil:
Use GL-5 (75W-90) or equivalent.
Gear oil capacity:
3.5 litres (3.7 US qt, 3.1 Imp qt)
Check the level of the transmission gear oil.
| Important | ||
|
When inserting the level gauge into transmission gear, align the protrusion on the side of the top part of level gauge with the notch in the gauge hole. |
||
| Note | ||
|
The level should be within the specified range marked on the gauge. |
