SAAB WIS ONLINE

INSTALLATION

INSTALLATION

Install the ABSCM&H/U bracket.

Tightening torque:

33 Nm (3.3 kgf-m, 24 ft-lb)

Install the ABSCM&H/U aligning the groove of damper on ABSCM&H/U side with the pawl of bracket.

Note

Check the identification mark of ABSCM&H/U.


Tightening torque:

7.5 Nm (0.76 kgf-m, 5.5 ft-lb)


Connect the brake pipes to their correct ABSCM&H/U connections.

Tightening torque:

15 Nm (1.5 kgf-m, 10.8 ft-lb)

Using the cable clip, secure the ABSCM&H/U harness to bracket.

Connect the connector to ABSCM&H/U.

Note
• Be sure to remove all foreign matter from inside of the connector before connecting.

• Ensure that the ABSCM&H/U connector is securely locked.


Connect the ground cable to ABSCM&H/U, and then apply anti-corrosive wax.

Install the air cleaner case and air intake duct.

Bleed air from the brake system.