SAAB WIS ONLINE

REMOVAL

REMOVAL

Disconnect the ground cable from battery.

Remove the air intake duct and air cleaner case from the engine compartment to facilitate removal of ABSCM&H/U.

Use compressed air to get rid of water around the ABSCM&H/U.

Note

Contact will be insufficient if the terminal gets wet.


Disconnect the ABSCM&H/U connector pulling up the lock lever.

Important

Do not pull the harness when disconnecting connector.



Remove the harness clip.

Disconnect the brake pipes from ABSCM&H/U.

Wrap the brake pipe using a vinyl bag not to spill the brake fluid on the vehicle body.

Important

When brake fluid is attached to the vehicle body, wash it off with water and wipe the water.


Remove the nuts and remove the ABSCM&H/U.

Important
• Do not drop or bump the ABSCM&H/U.

• Do not turn ABSCM&H/U upside down or place it sideways for storage.

• Be careful that no foreign objects are mixed in ABSCM&H/U.

• Be careful that no water enters inside the connectors.



Remove the ABSCM&H/U bracket.